Igbimọ FR4 TG150 PCB Awọn iyika apa meji borad pẹlu goolu lile 3u” ati Counter rii / bore
Alaye ipilẹ
| Awoṣe No. | PCB-A34 |
| Apoti gbigbe | Iṣakojọpọ igbale |
| Ijẹrisi | UL,ISO9001&ISO14001,RoHS |
| Ohun elo | Awọn ẹrọ itanna onibara |
| O kere aaye / Laini | 0.075mm / 3 milionu |
| Agbara iṣelọpọ | 50,000 sqm / osù |
| HS koodu | 853400900 |
| Ipilẹṣẹ | Ṣe lati orilẹ-ede Ṣaina |
ọja Apejuwe
FR4 PCB Ifihan
FR tumọ si “olutọju-ina,” FR-4 (tabi FR4) jẹ yiyan ipele NEMA fun ohun elo laminate epoxy ti a fi agbara mu, ohun elo akojọpọ ti o jẹ asọ fiberglass ti a hun pẹlu apopọ resini iposii ti o jẹ ki o jẹ sobusitireti pipe fun awọn paati itanna on a tejede Circuit ọkọ.
Aleebu ati awọn konsi ti FR4 PCB
Ohun elo FR-4 jẹ olokiki pupọ nitori ọpọlọpọ awọn agbara iyalẹnu ti o le ni anfani awọn igbimọ Circuit ti a tẹjade.Ni afikun si jijẹ ti ifarada ati rọrun lati ṣiṣẹ pẹlu, o jẹ insulator itanna pẹlu agbara dielectric giga pupọ.Ni afikun, o tọ, sooro ọrinrin, sooro otutu ati iwuwo fẹẹrẹ.
FR-4 jẹ ohun elo ti o ni ibatan jakejado, olokiki pupọ julọ fun idiyele kekere ati ẹrọ ibatan ati iduroṣinṣin itanna.Lakoko ti ohun elo yii ṣe ẹya awọn anfani lọpọlọpọ ati pe o wa ni ọpọlọpọ awọn sisanra ati awọn iwọn, kii ṣe yiyan ti o dara julọ fun gbogbo ohun elo, paapaa awọn ohun elo igbohunsafẹfẹ giga bi RF ati awọn apẹrẹ makirowefu.
Olona-Layer PCB Be
Awọn PCB Multilayer siwaju sii mu idiju ati iwuwo ti awọn apẹrẹ PCB pọ si nipa fifi awọn ipele afikun ti o kọja awọn ipele oke ati isalẹ ti a rii ni awọn igbimọ apa meji.Multilayer PCBs ti wa ni itumọ ti nipasẹ laminating awọn orisirisi fẹlẹfẹlẹ.Awọn ipele inu, deede awọn igbimọ iyika ẹgbẹ meji, ti wa ni akopọ papọ, pẹlu awọn fẹlẹfẹlẹ idabobo laarin ati laarin bankanje idẹ fun awọn ipele ita.Awọn ihò ti a ti gbẹ nipasẹ ọkọ (nipasẹ) yoo ṣe awọn asopọ pẹlu awọn ipele oriṣiriṣi ti ọkọ.
Imọ-ẹrọ & Agbara
| Nkan | AGBARA | Nkan | AGBARA |
| Fẹlẹfẹlẹ | 1-20L | Ejò ti o nipon | 1-6OZ |
| Awọn ọja Iru | HF (Igbohunsafẹfẹ giga) & (Igbohunsafẹfẹ Redio) igbimọ, Igbimọ iṣakoso Imedance, HDIboard, BGA & Fine Pitch Board | Solder boju | Nanya & Taiyo;LRI & Matt Red.alawọ ewe,ofeefee,funfun,bulu,dudu |
| Ohun elo ipilẹ | FR4 (Shengyi China, ITEQ, KB A +, HZ), HITG, FrO6, Rogers, Taconic, Argon, Nalco lsola ati bẹbẹ lọ | Ipari Ilẹ | HASL ti aṣa, HASL ti ko ni aṣaaju, FlashGold, ENIG (lmmersion Gold) OSP (Entek), lmmersion TiN, fadaka lmmersion, Wura lile |
| Yiyan dada itọju | ENIG(Gold immersion) + OSP ,ENIG(Gold immersion) + Ika goolu, ika goolu filasi, immersionSlive + ika goolu, Tin Immersion + Ika goolu | ||
| Imọ Specification | Iwọn ila to kere julọ/aafo: 3.5/4mil (dril lesa) Iwọn iho ti o kere julọ: 0.15 mm (lilu ẹrọ / 4 ọlọ lesa lilu) Oruka Ọdun ti o kere julọ: 4mil Idiwọn Ejò ti o pọju: 6Oz Iwọn iṣelọpọ ti o pọju: 600x1200mm Sisanra Board: D/S: 0.2-70mm, Multilayers: 0.40-7.Omm Min Solder Boju Afara: ≥0.08mm Ipin abala: 15:1 Pluging vias agbara: 0.2-0.8mm | ||
| Ifarada | Ifarada awọn iho palara: ± 0.08mm(min± 0.05) Ifarada iho ti kii-palara: ± O.05min (min + O/-005mm tabi +0.05/Omm) Ifarada Lakaye: ± 0.15 min(min± 0.10mm) Idanwo iṣẹ-ṣiṣe: Atako ti o lagbara: 50 ohms (deede) Pe agbara kuro: 14N/mm Gbona Wahala igbeyewo: 265C.20 aaya Solder líle boju: 6H E-igbeyewo foliteji: 50ov± 15/-0V 3os Warp ati Twist: 0.7% ( igbimọ idanwo semikondokito 0.3%) | ||
Nibo ni ohun elo resini wa lati ABIS?
Pupọ ninu wọn lati Shengyi Technology Co., Ltd. (SYTECH), ti o jẹ olupilẹṣẹ CCL keji ti agbaye ni awọn ofin ti iwọn tita, lati 2013 si 2017. A ṣe agbekalẹ awọn ibatan igba pipẹ ti ifowosowopo lati ọdun 2006. Awọn ohun elo resini FR4 (Awoṣe S1000-2, S1141, S1165, S1600) ti wa ni o kun lo fun ṣiṣe nikan ati ki o ni ilopo-apa tejede Circuit lọọgan bi daradara bi olona-Layer lọọgan.Eyi wa awọn alaye fun itọkasi rẹ.
Fun FR-4: Sheng Yi, King Board, Nan Ya, Polycard, ITEQ, ISOLA
Fun CEM-1 & CEM 3: Sheng Yi, King Board
Fun Igbohunsafẹfẹ giga: Sheng Yi
Fun Itọju UV: Tamura, Chang Xing (* Awọ to wa: Alawọ ewe) Solder fun Apa Kanṣoṣo
Fun Fọto Liquid: Tao Yang, koju (Fiimu tutu)
Chuan Yu (* Waawọn awọ: funfun, Yellow Solder Ironu, eleyi ti, Pupa, Blue, Alawọ ewe, Dudu)
PCB Production Ilana
Ilana naa bẹrẹ pẹlu sisẹ Ifilelẹ ti PCB nipa lilo eyikeyi sọfitiwia apẹrẹ PCB / Ọpa CAD (Proteus, Eagle, Tabi CAD).
Gbogbo awọn igbesẹ ti o ku jẹ ti Ilana iṣelọpọ ti Igbimọ Circuit Ti a tẹjade kosemi jẹ kanna bi PCB Sided Single tabi PCB Sided Double tabi PCB Multi-Layer.
Q / T Aago asiwaju
| Ẹka | Awọn ọna asiwaju Time | Deede asiwaju Time |
| Oni-meji | wakati 24 | wakati 120 |
| 4 fẹlẹfẹlẹ | wakati 48 | wakati 172 |
| 6 fẹlẹfẹlẹ | wakati 72 | wakati 192 |
| 8 fẹlẹfẹlẹ | wakati 96 | wakati 212 |
| 10 fẹlẹfẹlẹ | wakati 120 | wakati 268 |
| 12 fẹlẹfẹlẹ | wakati 120 | wakati 280 |
| 14 fẹlẹfẹlẹ | wakati 144 | wakati 292 |
| 16-20 fẹlẹfẹlẹ | Da lori awọn kan pato awọn ibeere | |
| Ju 20 Layer | Da lori awọn kan pato awọn ibeere | |
Gbigbe ABIS lati ṣakoso FR4 PCBS
Iho igbaradi
Yiyọ idoti ni pẹkipẹki & ṣatunṣe awọn paramita ẹrọ liluho: ṣaaju fifin nipasẹ pẹlu bàbà, ABIS san ifojusi giga si gbogbo awọn iho lori PCB FR4 ti a ṣe itọju lati yọ idoti, awọn aiṣedeede dada, ati smear iposii, awọn ihò mimọ rii daju pe fifin ni aṣeyọri faramọ awọn odi iho .tun, ni kutukutu awọn ilana, lu ẹrọ sile ti wa ni titunse parí.
Dada Igbaradi
Deburring fara: awọn oṣiṣẹ imọ-ẹrọ wa ti o ni iriri yoo mọ ṣaaju akoko pe ọna kan ṣoṣo lati yago fun abajade buburu ni lati nireti iwulo fun mimu pataki ati lati ṣe awọn igbesẹ ti o yẹ lati rii daju pe ilana naa ti ṣe ni pẹkipẹki ati ni deede.
Gbona Imugboroosi Awọn ošuwọn
Ni deede lati ṣe pẹlu awọn oriṣiriṣi awọn ohun elo, ABIS yoo ni anfani lati ṣe itupalẹ apapo lati rii daju pe o yẹ.lẹhinna titọju igbẹkẹle igba pipẹ ti CTE (alaisọdipúpọ ti imugboroosi igbona), pẹlu CTE kekere, o kere julọ ti o ṣeese ti palara nipasẹ awọn ihò lati kuna lati yiyi pada leralera ti bàbà eyiti o jẹ awọn asopọ asopọ Layer ti inu.
Iwọn iwọn
ABIS iṣakoso awọn circuitry ti wa ni ti iwọn-soke nipa mọ awọn ogorun ni ifojusona ti yi pipadanu ki awọn fẹlẹfẹlẹ yoo pada si wọn bi-apẹrẹ mefa lẹhin ti awọn lamination ọmọ ti pari.pẹlupẹlu, lilo awọn iṣeduro igbelosoke ipilẹ ti olupese laminate ni apapo pẹlu data iṣakoso ilana iṣiro inu ile, lati tẹ awọn ifosiwewe iwọn ti yoo wa ni ibamu ni akoko pupọ laarin agbegbe iṣelọpọ pato yẹn.
Ṣiṣe ẹrọ
Nigbati akoko ba de lati kọ PCB rẹ, ABIS rii daju pe o yan ni ohun elo to tọ ati iriri lati gbejade ni deede ni igbiyanju akọkọ.
Apinfunni Didara ABIS
Oṣuwọn kọja ti ohun elo ti nwọle loke 99.9%, nọmba awọn oṣuwọn ijusile pupọ ni isalẹ 0.01%.
Awọn ile-iṣẹ ifọwọsi ABIS ṣakoso gbogbo awọn ilana bọtini lati yọkuro gbogbo awọn ọran ti o pọju ṣaaju iṣelọpọ.
ABIS nlo sọfitiwia ilọsiwaju lati ṣe itupalẹ DFM lọpọlọpọ lori data ti nwọle, o si nlo awọn eto iṣakoso didara ilọsiwaju jakejado ilana iṣelọpọ.
ABIS ṣe 100% wiwo ati ayewo AOI bii ṣiṣe idanwo itanna, idanwo foliteji giga, idanwo iṣakoso impedance, apakan bulọọgi, idanwo mọnamọna gbona, idanwo tita, idanwo igbẹkẹle, idanwo idabobo ati idanwo mimọ ionic.
Iwe-ẹri
Kí nìdí Yan wa?
- Euipment-giga-iyara ti o ga ati Awọn ẹrọ Gbe ti o le ṣe ilana nipa awọn paati SMD 25,000 fun wakati kan
- Agbara ipese daradara ti o ga julọ 60K Sqm oṣooṣu-Nfunni iwọn kekere ati iṣelọpọ PCB eletan, tun iṣelọpọ iwọn nla
- Ẹgbẹ imọ-ẹrọ ọjọgbọn-40 awọn onimọ-ẹrọ ati ile irinṣẹ tiwọn, lagbara ni OEM.Nfunni awọn aṣayan irọrun meji: Aṣa ati Imọ-jinlẹ-jinlẹ ti IPC Class II ati III Awọn ajohunše
A pese okeerẹ iṣẹ bọtini EMS titan si awọn alabara ti o fẹ ki a pejọ PCB sinu PCBA, pẹlu awọn apẹrẹ, iṣẹ akanṣe NPI, iwọn kekere ati alabọde.A tun ni anfani lati ṣe orisun gbogbo awọn paati fun iṣẹ apejọ PCB rẹ.Awọn onimọ-ẹrọ wa ati ẹgbẹ alarinrin ni iriri ọlọrọ ni pq ipese ati ile-iṣẹ EMS, pẹlu awọn imọ-jinlẹ jinlẹ ni apejọ SMT ti o ngbanilaaye lati yanju gbogbo awọn ọran iṣelọpọ.Iṣẹ wa jẹ iye owo-doko, rọ, ati igbẹkẹle.A ti ni itẹlọrun awọn alabara kọja ọpọlọpọ awọn ile-iṣẹ pẹlu iṣoogun, ile-iṣẹ, adaṣe ati ẹrọ itanna olumulo.
FAQ
Lati rii daju agbasọ deede, rii daju lati ṣafikun alaye atẹle fun iṣẹ akanṣe rẹ:
Pari awọn faili GERBER pẹlu atokọ BOM
l Awọn iwọn
l Yipada akoko
l Panelization awọn ibeere
l Awọn ibeere Awọn ohun elo
l Pari awọn ibeere
l Rẹ aṣa agba yoo wa ni jišẹ ni o kan 2-24 wakati, da lori awọn oniru complexity.
Ti ṣayẹwo laarin awọn wakati 12.Ni kete ti ibeere Engineer ati faili iṣẹ ti ṣayẹwo, a yoo bẹrẹ iṣelọpọ.
Rara, a ko le gba awọn faili aworan wọle, ti o ko ba ni faili gerber, ṣe o le fi apẹẹrẹ ranṣẹ si wa lati daakọ rẹ.
PCB&PCBA Ilana daakọ:
Awọn ilana Imudaniloju Didara wa bi isalẹ:
a),Ayẹwo wiwo
b), Iwadii ti n fo, ohun elo imuduro
c), Iṣakoso ikọlu
d), Solder-agbara erin
e), Digital metallo graghic maikirosikopu
f), AOI (Ayẹwo Opitika Aifọwọyi)
Bẹẹni, a ni inudidun lati pese awọn ayẹwo module lati ṣe idanwo ati ṣayẹwo didara naa, aṣẹ apẹẹrẹ adalu wa.Jọwọ ṣe akiyesi olura yẹ ki o sanwo fun idiyele gbigbe.
Oṣuwọn ifijiṣẹ akoko jẹ diẹ sii ju 95%
a), 24 wakati yipada yara fun PCB afọwọkọ ẹgbẹ meji
b), 48wakati fun 4-8 fẹlẹfẹlẹ PCB
c), wakati 1 fun asọye
d), awọn wakati 2 fun ibeere ẹlẹrọ / esi ẹdun
e), awọn wakati 7-24 fun atilẹyin imọ-ẹrọ / iṣẹ aṣẹ / awọn iṣẹ iṣelọpọ
ABlS ṣe 100% wiwo ati ayewo AOl bii ṣiṣe idanwo itanna, idanwo foliteji giga, idanwo iṣakoso impedance, apakan micro, idanwo mọnamọna gbona, idanwo tita, idanwo igbẹkẹle, idanwo idabobo, ionic cleanliness igbeyewoati PCBA Iṣẹ-ṣiṣe igbeyewo.
| Agbara iṣelọpọ ti awọn ọja tita-gbona | |
| Double Side / Multilayer PCB onifioroweoro | Aluminiomu PCB onifioroweoro |
| Agbara Imọ-ẹrọ | Agbara Imọ-ẹrọ |
| Awọn ohun elo aise: CEM-1, CEM-3, FR-4 (TG giga), Rogers, TELFON | Awọn ohun elo aise: ipilẹ aluminiomu, ipilẹ Ejò |
| Layer: 1 Layer to 20 Layer | Layer: 1 Layer ati 2 Layer |
| Ibú Min.ila/aaye: 3mil/3mil(0.075mm/0.075mm) | Ibú Min.ila/aaye: 4mil/4mil(0.1mm/0.1mm) |
| Min.Iho iwọn: 0.1mm (dirilling iho) | Min.Iwọn iho: 12mil (0.3mm) |
| O pọju.Iwọn igbimọ: 1200mm * 600mm | Iwọn ti o pọju: 1200mm* 560mm(47in* 22in) |
| Pari ọkọ sisanra: 0.2mm- 6.0mm | Pari ọkọ sisanra: 0.3 ~ 5mm |
| sisanra bankanje Ejò: 18um ~ 280um (0.5oz ~ 8oz) | sisanra bankanje Ejò: 35um ~ 210um (1oz ~ 6oz) |
| Ifarada Iho NPTH: +/- 0.075mm, Ifarada iho PTH: +/- 0.05mm | Ifarada ipo Iho: +/- 0.05mm |
| Ifarada Ifarada: +/- 0.13mm | Ifarada ilana ipa ọna: +/ 0.15mm;ifarada ìla punching: +/ 0.1mm |
| Ilẹ ti pari: HASL ti ko ni idari, goolu immersion(ENIG), fadaka immersion, OSP, fifi goolu, ika goolu, Carbon INK. | Ilẹ ti pari: HASL ọfẹ asiwaju, goolu immersion (ENIG), fadaka immersion, OSP ati bẹbẹ lọ |
| Ifarada iṣakoso ikọsẹ: +/- 10% | Wà sisanra ifarada: +/- 0.1mm |
| Agbara iṣelọpọ: 50,000 sqm / osù | MC PCB Production agbara: 10.000 sqm / osù |
a), 1 Wakati agbasọ
b), 2 wakati ti ẹdun esi
c), atilẹyin imọ-ẹrọ wakati 7 * 24
d), 7*24 iṣẹ ibere
e), ifijiṣẹ wakati 7 * 24
f), 7 * 24 ṣiṣe iṣelọpọ
a), 1 Wakati agbasọ
b), 2 wakati ti ẹdun esi
c), 7 * 24 wakati atilẹyin imọ-ẹrọ
d),7*24 iṣẹ ibere
e), 7 * 24 wakati ifijiṣẹ
f), 7 * 24 ṣiṣe iṣelọpọ
